Plus Size Bra Wholesale Supplier First Article Inspection Guide for United States Buyers
Plus Size Bra Wholesale Supplier First Article Inspection for United States Buyers
For United States buyers sourcing plus size bras for resale, the plus size bra wholesale supplier first article inspection is the controlled check that happens before a bulk order is approved. A first article is a single finished unit, or a small set of units in the sizes the buyer has specified, made to the written specification the buyer and supplier have agreed in advance. The buyer compares that article against the specification, records every difference, and gives a clear decision: approve, approve after agreed corrections, or do not approve.
Used well, this step turns general expectations into specific, written agreement. It gives the buyer a chance to check fit intent, construction, materials, finish, labeling, and packaging on a real product before committing to larger quantities. It also gives the supplier a clear record of what to follow for the rest of the order, rather than relying on memory from earlier messages or samples.
This guide is written as procurement process guidance. It does not set product performance, price, or delivery claims. Every specification, cost line, and timing in the sections below is a field for the buyer and supplier to define, document, and agree for the specific order.
How first article inspection works for plus size lingerie wholesale supply
First article inspection works best when it follows a written sequence and each step produces a record the buyer can refer back to during bulk production and on receipt of the finished order.
- Agree the specification in writing before the first article is made. Include the size range, size grading approach, cup and band construction, strap and closure details, materials and trims, colors, labeling content and placement, and packaging format the buyer requires.
- Confirm which sizes and colors will be supplied as first articles. A single size may not show how grading, strap length, or band construction changes across the range, so the buyer should state which sizes need to be seen and why.
- Receive the first article with its identification details. Record the style reference, size, color, date received, and the version of the specification it was made to, so later comments can be linked to the correct version.
- Check the article against the specification item by item. Work through construction, materials, measurements the buyer has defined, finish, labeling, and packaging in a set order, and note a result for each item rather than giving a general impression.
- Record differences in writing with photographs where helpful. Describe the location and nature of each difference, state the change the buyer requires, and ask the supplier to confirm whether the change will be applied to bulk production.
- Give a formal approval decision. State whether the article is approved as submitted, approved subject to listed corrections, or not approved and in need of a revised article, and keep that decision with the final specification version.
If a revised article is needed, the buyer should state which items must be rechecked and whether the full check will be repeated or only the corrected items will be reviewed. That avoids confusion about what the second review covers.
What United States buyers should compare before approval
United States buyers should compare the first article in the same areas that will matter when the bulk order arrives, using only criteria they have defined in advance. Starting with construction, the buyer can check seam placement and stitching consistency, cup shape and symmetry, band construction, strap attachment and adjustment hardware, closure alignment, and the finish of edges and trims. Each point should be linked to a line in the specification, so a comment is a comparison rather than a new request introduced after the article was made.
Materials and feel should also be compared to what was agreed. The buyer can confirm that the fabric, lace or mesh, elastic, padding or lining, and hardware match the material descriptions, colors, and placement set out in the specification. If a material was changed, the buyer should ask the supplier to identify the change, explain where it appears, and confirm the material that will be used for bulk production.
Fit intent needs specific attention in plus size ranges. The buyer should state in advance how fit will be assessed, who will assess it, which sizes will be assessed, and what feedback will be recorded. The record should cover band feel, cup coverage, strap comfort and adjustment range, closure function, and overall support as observed by the assessor, described in words the buyer and supplier both understand. Any fit change should be written as an instruction linked to a size or size group, not left as a general comment.
Labeling and packaging are agreement fields, not assumptions. The buyer should supply the exact labeling content, wording, language, size indication format, and placement required for the order, and ask the supplier to show that content on the first article exactly as it will appear in bulk. The same approach applies to packaging: the buyer should specify individual packaging, inserts if any, carton packing method, carton marking content, and how sizes and colors are separated, then check the first article packaging against that specification and ask the supplier to confirm the packaging that will be used for shipment.
Landed cost and delivery should be clarified at the same stage, as questions and agreed fields. The buyer can ask the supplier to itemize the unit price, packaging charges, freight method, and any other charge lines separately, and to state which cost elements are included and which are excluded, so the buyer can build a complete landed cost view using information the buyer obtains for the remaining elements. For delivery, the buyer should agree the destination, packing list content, shipment identification, dispatch notification process, and the procedure for reporting delays or quantity differences, and keep those terms with the approved specification.
Buyer decision table for first article approval
The table below turns the inspection into decisions. Each row is a buyer-defined process check. It does not set a product claim; it sets what to compare, what to agree, and what to do when the article and the specification differ.
| Decision area | What to check on the first article | What to agree before bulk production | Buyer action if it does not match |
|---|---|---|---|
| Size and grading | Compare each supplied size to the buyer-defined size chart and grading notes | Confirm the final size chart, grading method, and sizes included in the order | Ask the supplier to correct the affected sizes and resubmit those sizes for review |
| Construction | Compare seams, cup shape, band, straps, and closure to the written construction specification | Confirm the final construction details and any agreed changes in a revised specification version | Require the supplier to list each construction change and confirm it in writing before production |
| Materials and trims | Compare fabric, elastic, trims, and hardware to the agreed material descriptions and colors | Confirm the exact materials, colors, and placement to be used for the bulk order | Specify the material to be replaced and ask for a revised article showing the correction |
| Fit assessment | Review the recorded fit feedback for the sizes the buyer chose to assess | Confirm which fit comments will be applied, to which sizes, and how they change the specification | Ask the supplier to revise the affected sizes and provide a new fit record for approval |
| Labeling | Compare label content, wording, size indication, and placement to the buyer-supplied labeling specification | Confirm the final label artwork or text, placement, and attachment method | Require the supplier to correct the label to the buyer-supplied content and show the correction for approval |
| Packaging | Compare individual packaging and carton packing to the buyer packaging specification | Confirm packaging materials, packing method, and carton marking content for shipment | Specify the packaging correction required and ask the supplier to confirm the revised method in writing |
| Cost and delivery terms | Review whether all charge lines and delivery fields the buyer requested have been provided | Confirm included and excluded cost elements, destination, and dispatch notification process | Ask the supplier to supply the missing lines or terms before the buyer gives bulk approval |
A completed table for a specific order becomes part of the approval record. The buyer can attach it to the final specification so that receiving checks on the bulk shipment use the same criteria as the first article check.
How to document differences and handle revisions
Clear documentation is what makes an approval enforceable as a shared reference. For each difference, the buyer should record the specification reference, a plain description of what was observed, a photograph if it helps show location, the change required, and whether a revised article is needed or a written confirmation is sufficient. Keeping the comments numbered helps the supplier respond to each point in order and helps the buyer verify that every point has been answered.
The supplier response should be recorded in the same document. For each numbered point, the buyer can ask for a statement of what will change, whether the specification itself needs to be updated, and whether the change affects any other size, color, or component. If the specification changes, the buyer should issue a new version number or date and ask the supplier to confirm that bulk production will follow that version only.
Approval should never be implied by silence or by a general positive comment. The buyer should issue an explicit decision that names the style, specification version, sizes and colors covered, any corrections that remain conditions of approval, and the date of the decision. If approval is conditional, the conditions should be listed in the decision itself, with a method for confirming each condition has been met, such as a photograph, a revised article, or a written statement from the supplier.
The buyer should also agree in advance what happens if bulk goods differ from the approved article. That agreement can cover how differences will be reported, what evidence the buyer will provide, what remedies the buyer will request, and the time window for raising a claim, all as terms the buyer and supplier set for that order. Writing this before production is easier than negotiating it after shipment.
RFQ Checklist
Use this checklist when sending a request for quotation for plus size bras where a first article will be required. Each item is a field or action to complete before bulk approval.
- Ask the supplier to confirm the style reference, size range, and size grading approach that the quotation covers.
- Specify the cup, band, strap, closure, and seam construction details that the first article must follow.
- Require the supplier to identify the materials, trims, elastic, and hardware included in the quotation by description and color.
- Ask the supplier to state which sizes and colors will be provided as first articles and how they will be identified.
- Specify the labeling content, wording, size indication format, and placement that the buyer will supply for the order.
- Require the supplier to confirm the individual packaging, carton packing method, and carton marking content included in the quotation.
- Ask the supplier to itemize unit price, packaging, freight method, and any other charge lines, and to state which elements are included or excluded.
- Specify the delivery destination, packing list content, and dispatch notification information the buyer requires.
- Ask the supplier to confirm the approval process, including how corrections will be recorded and how a revised article will be handled.
- Require the supplier to confirm that bulk production will follow the final approved specification version named by the buyer.
How to record approval and move to bulk ordering
Once the checklist is complete and the first article decision has been issued, the buyer can assemble a single approval pack for the order. A useful pack contains the final specification version, the completed decision table, the numbered comments and supplier responses, the fit record, photographs of the approved article and its labeling and packaging, the agreed cost lines and delivery terms, and the signed or otherwise confirmed approval decision. Keeping these together reduces the risk that different people work from different versions.
The bulk order itself should reference the approval pack directly. The buyer should state the style, specification version, sizes, colors, quantities per size and color, packaging requirements, delivery destination, and the approval date on the order, and ask the supplier to confirm the order back against those same references. If any detail on the confirmation differs, the buyer should resolve it in writing before production starts.
On receipt of the bulk shipment, the buyer can use the approved first article and the approval pack as the comparison point for receiving checks. The same decision areas apply: size, construction, materials, labeling, packaging, quantities, and documentation. Recording receiving results against the same criteria closes the loop that first article inspection opened, and gives the buyer a clear, evidence-based record for any follow-up with the supplier.
Discuss Your Requirements
Review our manufacturing capabilities, then share your specifications for a supplier-fit review.